Breackout Portrait animal wall mural
Reference: F7437A charming portrait of a relaxed dog with its eyes closed and tongue out, surrounded by a dynamic abstract design. The playful geometric shapes enhance the overall composition, creating an engaging visual experience that celebrates the beauty of this beloved pet.
The Breackout Portrait animal wall mural features a stunning design that combines an optical illusion with a customizable portrait of a huskie, making it a unique and eye-catching addition to any space. The broken wall effect gives the impression that the dog is breaking through the wall, creating a visually striking and impactful look. The non-woven wallpaper is manufactured in matt colors, adding a touch of elegance to the mural. It is easy to apply with glue and can be cleaned with a damp cloth and a little neutral soap. With a durability of 10-15 years and a weight of 180 grams per square meter, this mural is not only visually appealing but also long-lasting. Whether used in a home or office setting, this mural is sure to create a wow factor!
Why this product should be used for decoration
The Breackout Portrait animal wall mural is the perfect choice for adding a unique and captivating touch to any space. The stunning design, featuring an optical illusion and a customizable huskie portrait, makes it a standout piece of decor that is sure to impress. Whether used in a living room, bedroom, or office, this mural will instantly elevate the aesthetic appeal of the space, adding a touch of personality and charm.
How to apply this product
Applying the Breackout Portrait animal wall mural is a simple process that requires the use of glue and basic tools such as a roller, brush, and cutter. The non-woven wallpaper can be easily applied to the wall, creating a seamless and professional finish. Simply follow the included instructions for a hassle-free application process that will bring the stunning design to life in any space.
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.