Bathroom wallpaper in marble design
Reference: P12945Transform your space with our stunning Bathroom wallpaper in marble design, an exquisite choice that brings elegance and sophistication to any bathroom. Graphically, this design mimics the luxurious veining and soft tones of natural marble, offering a chic and modern aesthetic. The wallpaper is crafted in matt colours that enhance its realistic look, made from non-woven wallpaper material for effortless application and maintenance.
Why this product should be used for decoration
This Bathroom wallpaper in marble design bathroom wallpaper is perfect for those looking to elevate their home décor. Its elegant marble pattern adds depth and richness, creating a serene environment that invites relaxation. Imagine soaking in a bath surrounded by the beauty of marble – it’s like having a spa at home! This wallpaper not only enhances your bathroom's visual appeal but also reflects your style and sophistication.
How to apply this product
Applying this Bathroom wallpaper in marble design bathroom wallpaper is a breeze. Simply use glue to adhere it to your wall, utilizing a roller, brush, and cutter for a seamless application. With a little care, you can enjoy the beauty of marble in your bathroom!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.