Beige leaves design entryway wallpaper
Reference: P7829The beige leaves design entryway wallpaper features a stunning graphic that incorporates elegant leaves in a soothing beige color, perfect for creating a welcoming and stylish entrance to any space. The non-woven wallpaper is manufactured in matt colors, providing a luxurious and refined finish. Applying the wallpaper is a straightforward process, requiring glue, a roller, brush, and cutter for precise installation. The wallpaper can be easily cleaned with a damp cloth and neutral soap, ensuring long-lasting beauty. With a grammage of 180 grams per square meter and a durability of 10-15 years, this wallpaper offers both quality and longevity. Additionally, it holds an M2 reaction to fire certification, providing peace of mind. Whether used in a residential or commercial setting, this wallpaper adds a touch of natural elegance to any space.
Why this product should be used for decoration
The beige leaves design entryway wallpaper is the ideal choice for adding a touch of natural beauty and sophistication to any space. Its elegant design and soothing beige color create a warm and welcoming atmosphere, making it perfect for enhancing the entrance of a home or business. The timeless appeal of the leaf pattern adds a sense of tranquility and elegance, elevating the overall aesthetic of the space. By incorporating this wallpaper into your decor, you can effortlessly transform any room into a stylish and inviting environment.
How to apply this product
Applying the beige leaves design entryway wallpaper is a simple and straightforward process. Begin by preparing the wall surface and gathering the necessary tools, including glue, a roller, brush, and cutter. Then, carefully measure and cut the wallpaper to fit the desired area before applying the glue and carefully smoothing out any air bubbles. With its easy application process, this wallpaper is an excellent choice for adding a touch of natural elegance to any space.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.