Fluid colorful swirls marble wallpaper
Reference: P9277Colorful swirls create a fluid marble effect, combining shades of blue, purple, and gold. The dynamic patterns evoke a sense of movement and depth, capturing the beauty of abstract art. This design enhances visual interest and adds a contemporary touch to any space.
Transform your space with our stunning Fluid colorful swirls marble wallpaper, a captivating design that features elegant watercolour patterns, abstract swirls, and vertical stripes. The beautiful traces of marble create a vibrant atmosphere, perfect for any room in your home. Experience the allure of artful sophistication as this unique wallpaper complements your decor!
Why this product should be used for decoration
Embrace the beauty of our Fluid colorful swirls marble wallpaper to elevate your interiors! This exquisite design brings an artistic touch that inspires creativity and joy. Whether it’s for a cozy living room or an elegant dining area, its stunning patterns transform walls into a breathtaking canvas. Let your personality shine through with this mesmerizing wallpaper!
How to apply this product
Applying our Fluid colorful swirls marble wallpaper is simple and enjoyable! Use a roller and brush to apply glue on the wall or the back of the product. With a cutter, trim for a perfect fit. Enjoy the process and watch your space come to life!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.