Marble wallpaper in swirling ocean hues
Reference: P12023Introducing our stunning Marble wallpaper in swirling ocean hues, a visual masterpiece that brings the tranquil beauty of the sea into your home. This design features mesmerizing patterns of deep blues and soft aquamarines, seamlessly blending together to create an elegant and sophisticated ambiance. The non-woven material ensures a smooth application, while its matte finish enhances the rich colors, making it a perfect choice for any stylish room.
Why this product should be used for decoration
The Marble wallpaper in swirling ocean hues marble wallpaper transforms spaces into serene retreats, inspiring relaxation and creativity. Imagine stepping into a room adorned with this breathtaking design, where every glance immerses you in the calmness of ocean waves. Ideal for living rooms, bedrooms, or even creative spaces, it adds a touch of luxury and a soothing aesthetic that captivates the senses!
How to apply this product
Applying the Marble wallpaper in swirling ocean hues marble wallpaper is a simple process! Use wallpaper glue on either the wall or the back of the product, and ensure you have a roller, brush, and cutter on hand for a flawless finish. With a little care, you can easily create a stunning backdrop that will impress everyone!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.