Soft Diamond Grid square wallpaper
Reference: P8714A delicate diamond grid pattern emerges in subtle pastel hues, presenting an elegant and simplistic design ideal for adding a gentle touch to interiors.
The Soft Diamond Grid square wallpaper features a stunning design with soft, elegant colors and a subtle, geometric pattern. Perfect for interior styling, this wallpaper adds a touch of sophistication to any space. The pink hues and simple yet striking diamond grid pattern create a timeless and stylish look, making it ideal for decorating any room in your home.
Why this product should be used for decoration
Soft Diamond Grid square wallpaper is the perfect choice for adding a touch of elegance to your home decor. The soft colors and geometric pattern create a sophisticated and stylish look, making it a stunning addition to any room. Whether you're looking to create a chic feature wall or add a subtle touch of design to your space, this wallpaper is the perfect choice for achieving a stylish and modern look.
How to apply this product
Applying Soft Diamond Grid square wallpaper is easy and hassle-free. Simply use glue to apply it to the wall, and use a roller, brush, and cutter for a smooth application. Once in place, it can be easily cleaned with a damp cloth and a little neutral soap, making it a practical and stylish choice for any home. With a durability of 10-15 years, this wallpaper is a long-lasting and beautiful addition to any space.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.