Vertical Stripe Ensemble striped wallpaper
Reference: P8177The design features a minimalist pattern of vertical stripes, presenting a clear symmetry. Its straightforward and uniform configuration lends itself to a modern and elegant aesthetic.
The Vertical Stripe Ensemble striped wallpaper design features a striking combination of vertical lines and bold, minimalist symmetry. The vibrant red stripes create a visually stunning pattern that will instantly elevate any space, adding a touch of modern elegance. This non-woven wallpaper is manufactured in matt colours, ensuring a luxurious finish that will last for years to come. Applying this wallpaper is a breeze - simply use glue and tools such as a roller, brush, and cutter. Once in place, it can be easily cleaned with a damp cloth and neutral soap, making maintenance a simple task. With a durability of 10-15 years and an M2 reaction to fire certification, this wallpaper is both practical and stylish. Each roll is 50 centimetres wide, and the product can be easily removed by wetting with a sprayer, allowing for hassle-free redecoration. Elevate your space with the Vertical Stripe Ensemble striped wallpaper and create a truly stunning ambiance!
Why this product should be used for decoration
Elevate your space with the stunning Vertical Stripe Ensemble striped wallpaper. The vibrant red stripes and bold, minimalist symmetry create a visually striking pattern that will instantly add a touch of modern elegance to any room. Transform your space and create a truly unique ambiance with this luxurious wallpaper that combines style and practicality effortlessly.
How to apply this product
Applying the Vertical Stripe Ensemble striped wallpaper is a breeze. Simply use glue and tools such as a roller, brush, and cutter to achieve a flawless finish. Transform your space effortlessly with this luxurious wallpaper that is sure to make a statement.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.